BT FREEWAY PRO TWIN 6196 - Manual (Page 5)

Install the batteries
Your BT Freeway Pro mobile radios are each supplied
with a rechargeable NiMH battery pack.
However, each mobile radio will operate with 3 x AA
alkaline batteries (not supplied) if required.
1. With the back of the radio facing you, lift the battery
cover latch up to release and remove the battery cover.
2. Insert the battery pack ensuring that the metal contacts
are facing out as shown.
Or
Insert 3 x AA alkaline batteries, ensuring that the + and –
marked on the batteries match up with those marked
inside the battery compartment, as shown.
Or
3. Reposition the battery cover and press down until it clicks
into place.
5
BT Freeway Pro Twin – Issue 02 – Edition 02 – 04.06.04 – 6196
Getting started
Please note
If the belt clip is attached you will
need to remove it first. See
“Attaching the belt clip” on page 7.
Metal
charging
pads
6196 BT Fway Pro Tw UG [2] 4/6/04 10:17 am Page 5