BT FREEWAY PRO TWIN 6196 - Manual (Page 15)

15
BT Freeway Pro Twin – Issue 02 – Edition 02 – 04.06.04 – 6196
1. Press , the icon is displayed.
Your radio will rapidly scan each of the 8 channels and
pause for 5 seconds on any active channel so you can
hear the transmission, before resuming the scan.
If an active channel is found and you hear a transmission:
To respond to the other radio, press within 5 seconds.
To exit the transmission and continue the channel scan,
press
or .
If you activate scan while the sub-channel is set to 0
then the radio will check for any activity on each channel
regardless of the code in use on that channel.
If you activate scan while the sub-channel is set between
1 and 38 your radio will detect a transmission on any
channel so long as this transmission is using a sub-channel
(CTCSS). It will not detect a transmission on any channel
that is not using a sub-channel.
To end scanning, press the button.
Delete channels from the scan list
You can temporarily remove a channel from the scan list,
for example, to avoid nuisance transmissions.
PTT
Using your mobile radios
You cannot remove your home
channel from the scan list (your home
channel is the channel your radio
was set to when you activated scan),
It is suggested that you always
scan using sub-channel 0.
6196 BT Fway Pro Tw UG [2] 4/6/04 10:17 am Page 15