Pioneer DVH-3900MP - Manual (Page 19)

2 Rotate VOL (Press VOL +/
– on the re-
mote control) to adjust the sound quality.
Indication Turn right Turn left
VOL
Increase the vo-
lume level. Decrease the vo-
lume level.
BAS
Increase the bass
level. Decrease the bass
level.
MID
Increase the mid-
dle level. Decrease the mid-
dle level.
TRB
Increase the treble
level. Decrease the tre-
ble level.
BAL
Decrease the level
of the left speaker
(s). Decrease the level
of the right speak-
er(s).
FAD
Decrease the level
of the front speak-
er(s). Decrease the level
of the rear speak-
er(s).
Note
When EQ or LOUD is set to Off, you can adjust
the sound level ( BAS, MID, TRB) settings.
Changing the general settings
1 Press and hold SEL/MENU so that one
of menu items appears.
2 Press SEL/MENU repeatedly to scroll be-
tween menus.
AF ON
—REG ON—TA ALARM—PI SOUND—
AUX ON
—AUX 0DB—DEMO OFF—
BEEP 2ND
3 Rotate VOL clockwise or counterclock-
wise to select one of the settings.
The setting displayed on the display window is
set and automatically disappears after about
six seconds.
! AF (Alternative Frequency) ON/OFF
When the reception quality drops, the tuner
automatically changes to another station in
the network, broadcasting a better recep-
tion quality, using the PI and AF codes.
AF ON: Wherever you drive, you can con-
tinue to listen to the same program without
interruptions.
AF OFF: Only station name will be dis-
played. In case of poor reception no alterna-
tive station can be used.
! REG (Region) ON/OFF
REG ON: The unit switches to another sta-
tion, within the same network, broadcasting
the same program when the receiving sig-
nals from the current station become weak.
REG OFF: The unit switches to another sta-
tion, within the same network when the re-
ceiving signals from the current station
become weak. (This mode, the program
may differ from the one currently received.)
! TA(Traffic Announcement) ALARM/
SEEK
TA ALARM: When a newly tuned station
has no TP information for five seconds, a
double beep sound is output.
TA SEEK: When the newly tuned station
does not receive TP information for five sec-
onds, the receiver retunes to the next sta-
tion.
! PI (Program Identification) SOUND/
MUTE
PI SOUND: If the sound of a station with dif-
ferent PI is heard intermittently, the receiver
mutes the sound after one second.
PI MUTE: If the sound of a station with dif-
ferent PI is heard intermittently, the receiver
mutes the sound right now.
! AUX (Auxiliary) ON/OFF
It is possible to use auxiliary equipment
with this unit. Activate the auxiliary setting
when using auxiliary equipment connected
to this unit.
AUX ON: When using a auxiliary equip-
ment.
Basic operation
En
19
English
Section
05