Pioneer DVH-3900MP - Manual (Page 22)

RDS display options
In normal RDS operation the display will indi-
cate the station name. Pressing
DISP enables
you to cycle through the various data types in
the following sequence:
CT
—PTY—RT—FREQUENCY (When PS is not
received.)
! CT (Time controlled by the channel)
! PTY (Program type recognition)
! RT (Radio text recognition)
! PS (Program Service name)
PTY (Program Type) function
To select a certain program type out of the re-
ception band, the following procedure can be
used.
1 Press and hold TA/PTY to select a pro-
gram types.
2 After, press and hold TA/PTY repeat-
edly for selecting each mode.
Music group
—Speech group—Search off
3 Press one of preset buttons 1 to 6 re-
peatedly.
Each time this button is pressed, the display
mode changes as follows:
No. Music group
1 POP M, ROCK M
2 EASY M, LIGHT M
3 CLASSICS, OTHER M
4 JAZZ, COUNTRY
5 NATION M, OLDIES
6 FOLK M
No. Speech group
1 NEWS, AFFAIRS, INFO
2 SPORT, EDUCATE, DRAMA
3 CULTURE, SCIENCE, VARIED
4 WEATHER, FINANCE, CHILDREN
5 SOCIAL, RELIGION, PHONE IN
6 TRAVEL, LEISURE, DOCUMENT
Note
! RDS is only available for FM reception.
TA (Traffic Announcement
identification) function
TA function allows the unit to switch to traffic
annoucement (TA) from the current source
(Another FM station, CD, or other connected
components).
% To switch the TA function on or off,
press TA/PTY.
Notes
! If TP (Traffic Program identification) indicator
lights up, TA reception is activated.
! TA reception will not work if you are listening
to an MW station.
RDS operation
En
22
Section
07