Pioneer AVH-X2650BT - Manual (Page 39)

Black plate (39,1)
Setting the steering wheel
control
You can set the steering wheel control on the
unit
’s display via a wired remote cable. Refer to
Connecting the power cord on page 45.
This setting is required in order to use the steer-
ing wheel remote control function.
Important
! In some cases this function may not work
correctly.
For details please contact your dealer or an
authorized Pioneer Service Station.
! Park your car in a safe place and use this
function. Do not operate it while driving.
1 Press the home button to switch to the
home display.
2 Touch the system key to open the system
menu.
3 Touch Steering Wheel Control on the sys-
tem menu.
The
Steering Wheel Control screen appears.
Steering Wheel Control
This function allows you to control this In-Dash
Receiver from your steering wheel control.
If you have a connected steering wheel control adapter
for Pioneer, please choose "With Adapter". If you are
connected to your steering wheel control directly,
please choose "Without Adapter".
Without Adapter With Adapter
1 2
1 With Adapter key
Touch this key when connecting a steering
wheel control adapter for Pioneer.
2 Without Adapter key
Touch this key when directly connecting to
the car
’s steering wheel control harness.
4 Select settings according to the connec-
tion method being used.
# For steering wheel control adapter for
Pioneer users
1 Touch With Adapter.
Follow the on-screen instructions for subse-
quent steps.
# For users directly connecting the unit to the
car
’s steering wheel control harness
1 Touch Without Adapter.
Proceed to the next step to continue.
5 Touch Clear.
The confirmation screen appears.
When it is unnecessary to clear the settings,
such as when changing key assignment, pro-
ceed to step 7.
6 Touch OK.
You must clear all default settings before you
use this function.
7 Touch the desired function key on the
screen.
Steering Wheel Control
N/A
Source BAND/ESC VOLUME+ VOLUME-
Left Right Up Down
PLAY/PAUSE STOP FF REV
MUTE ATT MODE Off Hook
Clear
SOURCE
Press to cycle through all the available sources.
Press and hold to turn the source off.
BAND/ESC
Press to select the tuner band when tuner is selected
as a source. Also used to cancel the control mode of
functions.
Press to switch between modes.
VOLUME+
VOLUME-
Press to increase or decrease volume.
Left
Press to return to the previous track (chapter).
Right
Press to go to the next track (chapter).
Up
Down
Press to select the next or previous disc or folder.
Press to recall radio station frequencies assigned to
preset tuning keys.
PLAY/PAUSE
Press to pause or resume playback.
STOP
Press to stop playback.
FF
Press to perform fast forward.
Press to change the fast forward speed.
REV
Press to perform fast reverse.
Press to change the fast reverse speed.
MUTE
Press to mute. Press again to unmute.
ATT
Press to attenuate the sound. Press again to cancel.
MODE
Turning the information display off.
Press to switch to the connected device.
Off Hook
(Function of AVH-X5650BT/AVH-X2650BT)
Ending a call.
Rejecting an incoming call.
Canceling call waiting.
On Hook
(Function of AVH-X5650BT/AVH-X2650BT)
Accepting an incoming call.
Making a phone call, when selecting a phone num-
ber.
Switching between callers on hold.
VR
(Function of AVH-X5650BT/AVH-X2650BT)
Press and hold to switch to the voice control mode.
Press again to cancel the voice control mode.
8 Touch and hold down the key for your
vehicle ’s steering wheel.
The key on the screen becomes active.
Touch
N/A if you wish to cancel.
Notes
! You can set a function key to more than one
steering wheel key.
! If you set multiple function keys to the same
steering wheel key, only the last one you set
is enabled.
English
System settings
39
Section
System settings
En
19
<CRD4760-A>39