Pioneer AVH-X2650BT - Manual (Page 40)

Black plate (40,1)
Using the Favorite menu
1 Display menu columns to register.
Refer to Menu operations on page 29.
# You can customize menus except Video Setup
menu.
2 Touch the star icon in the menu column
for the desired menu to register the menu.
The star icon for the selected menu is filled in.
# To cancel the registration, touch the star icon in
the menu column again.
3 Display the favorite menu and choose a
registered menu.
Refer to Menu operations on page 29.
Note
You can register up to 12 columns.
Bluetooth connection menu
operations
(Function of AVH-X5650BT/AVH-X2650BT)
Note
If you are using a cellular phone that can be
connected via Bluetooth wireless technology, we
recommend that you use your phone to search
for this unit and establish a connection between
it and your phone. The PIN code is set to
0000
as default. The product name for this unit will
display on your phone as the device name. For
details, refer to Entering PIN code for Bluetooth
wireless connection on page 41. For further de-
tails concerning the procedures for establishing
Bluetooth wireless connections, refer to the in-
struction manual for the phone.
Pairing from this unit
1 Press the home button to switch to the
home display.
2 Touch the Bluetooth key to open the
Bluetooth connection menu.
3 Touch Connection to select a device.
4 Start to search.
Starting to search.
While searching, is displayed and when avail-
able devices are found, the device names or
Bluetooth device addresses (if names cannot be
obtained) are displayed.
# If you want to switch between the device names
and Bluetooth device addresses, touch the icon.
Switching between the de-
vice names and Bluetooth
device addresses.
# To cancel searching, touch Stop.
# If three devices are already paired, Memory Full
is displayed and pairing cannot be performed. In
such cases, delete a paired device first. Refer to
page 40.
# If no device can be found, Not Found is dis-
played. In such cases, check the status of the
Bluetooth device and search again.
5 Touch a device name to select the device
you want to connect to.
While connecting,
Pairing is displayed. If the
connection is established, Paired is displayed.
# If your device support SSP (Secure Simple Pair-
ing), six-digit number appears on the display of this
unit. Once the connection is established, this num-
ber disappears.
# If the connection fails, Error is displayed. In such
cases, try again from the beginning.
# The PIN code is set to 0000 as the default, but
can be changed. Refer to Entering PIN code for
Bluetooth wireless connection on page 41.
# Once the connection is established, the device
name is displayed.
Touch the device name to disconnect.
# If you want to delete a paired Bluetooth tele-
phone, display
Delete OK?. Touch Yes to delete the
device.
Deleting a paired device.
# Never turn the unit off while the paired Bluetooth
telephone is being deleted.
Favorite menu
40
Section
Bluetooth connection menu
En
20
21
<CRD4760-A>40