Pioneer AVIC-F9210BT - Manual (Page 8)

Connecting the system
WIRED REMOTE INPUT
Please see the Instruction
Manual for the Wired Remote
Control Adapters (sold separately).
The navigation unit
USB and mini-jack
connector
(*2)
— When connecting your iPod, both connections are necessary.
— It is necessary to set “
AV1 Input” in “AV System Settings” to “iPod”
when connecting the iPod. (For details, refer to Operation Manual.)
(*2)
Green
3.55 m
Aerial
jack
RDS-TMC tuner Vehicle
aerial
2 m
30 cm
1 m
IP-BUS connector
(IP-BUS connector is
available for AVIC-F20BT.)
(*1)
Connect either the
USB Interface Cable
for iPod or an
appropriate USB
storage device.
(*1)
Engb
8
Section
03 Connecting the System