Pioneer AVH-X8500BT - Manual (Page 45)

3 Touch MIXTRAX Setup on the system
menu.
MIXTRAX setting items are displayed.
! Short Playback Mode – When turned on,
select an audio track playback length.
When this mode is turned off, the audio
track will play all the way to the end.
60s (60 sec.)
—90s (90 sec.)—120s
(120 sec.)
—150s (150 sec.)—180s (180 sec.)
—Auto (auto)—Off (off)
When
Auto is selected, the playback time
for each song is set automatically when the
playback song changes.
! Display Effect – When Display Effect is
set to on, the artwork display can be moved
according to the music type.
! Cut-In Effect – When Cut-In Effect is set to
on, sound effects will play between tracks.
! Effect Setting – Use Effect Setting to set
up the sound effect you want to insert be-
tween tracks.
Setting the effect
You can change the settings for sound effects.
Flanger1
Flanger3
LPFilter
Noise1
Echo
Flanger2
HPFilter
Noise2
CrossFade
Crush
Effect Setting
Cuetom Simple Standard
Sound effects
! Flanger1
! Flanger2
! Flanger3
A rushing sound that mimics that rising
and falling sounds of a jet engine.
! HPFilter
An effect that cuts off low frequencies.
! LPFilter
An effect that cuts off high frequencies.
! Crush
A sound effect that changes audio to
mimic the sound of objects being crushed
or smashed.
! Noise1
! Noise2
A sound effect that creates white noise.
! Echo
A sound effect that creates an echoing ef-
fect.
! Cross Fade
A sound effect that creates a fade in and
fade out effect between songs.
Setting sound effects as presets
using the preset key
The Standard and Simple sound effects are
set already as default presets.
% Touch Standard or Simple to check the
settings.
The registered preset sound effect for the key
that was touched is set as a preset.
Registering sound effects as
presets
Registers a desired combination of sound ef-
fects to
Custom.
Touch Custom to easily set the desired sound
effect.
1 Touch Custom.
2 Add a check mark to the desired sound
effect by touching the option.
The marked sound effect is registered as a pre-
set in
Custom.
Notes
! If a sound effect is touched in the selection
screen for Standard or Simple, the Custom
screen is automatically displayed and the
sound effect is registered to
Custom.
! You can listen to fixed sounds to hear exam-
ples by touching the speaker icon.
En
45
Section
12
Using
MIXTRAX
Using MIXTRAX