System settings setting the app connection, Switching the auxiliary setting, Setting av input – Pioneer AVH-X8500BT User Manual
Page 60: Setting the rgb input, Setting the app sound mixing, Updating firmware, Setting the, Setting the app connection, 17 system settings
Setting the App connection
Refer to Setting the App connection on page
35.
Switching the auxiliary setting
Activate this setting when using an auxiliary
device connected to this unit.
1
Press the home button to switch to the
home display.
2
Touch the system key to open the sys-
tem menu.
3
Touch AUX Input on the system menu
to turn AUX Input on or off.
Setting AV input
Activate this setting when using an external
video component connected to this unit.
1
Press the home button to switch to the
home display.
2
Touch the system key to open the sys-
tem menu.
3
Touch AV Input on the system menu to
turn AV Input on or off.
Setting the RGB Input
You can switch the setting of RGB input.
1
Press the home button to switch to the
home display.
2
Touch the system key to open the sys-
tem menu.
3
Touch RGB Input on the system menu
to select the RGB input.
iPhone
—QVGA NAVI—WVGA NAVI
# If you use AppRadio Mode, set to iPhone.
# When connecting a navigation system, set
whichever of
QVGA NAVI and WVGA NAVI
matches the specifications of the system.
Setting the App sound mixing
Refer to Setting the App sound mixing on page
36.
Updating firmware
This function is used to update this unit with
the latest firmware.
Important
! The only port that supports the firmware up-
date is USB input 1.
! Never turn the unit off and never disconnect
the USB storage device while the firmware is
being updated.
! You can only start the firmware update when
the vehicle is stopped and the parking brake
is engaged.
1
Connect the USB storage device that
contains only the update file.
2
Press the home button to switch to the
home display.
3
Touch the system key to open the sys-
tem menu.
4
Touch Firmware Update.
5
Touch Start to display the data transfer
mode.
# Follow the on-screen instructions to finish up-
dating the firmware.
# This unit will reset automatically after the firm-
ware update is completed if the update is suc-
cessful.
Notes
! When the firmware update starts, the source
is turned off and the Bluetooth connection
disconnected.
En
60
Section
17
System settings