Pioneer PDP 434HDE - Manual (Page 42)

08 Basic Adjustment Settings
42
En
Front Surround
This provides three-dimensional sound effects and/or
deep, rich bass.
1 Press HOME MENU.
2 Press / to select “Sound”, and then press
ENTER.
3 Press / to select “Front Surround”, and then
press / to select the desired parameter.
Bass
Balance
Treble
Reset
FOCUS
Front Surround
0
0
On
2
Sound STANDARD
TruBass+SRS
Item Description
Off Deactivates both the SRS and TruBass.
SRS Reproduces highly effective three-
dimensional sound.
TruBass Provides deep, rich bass using a new
(factory default) technology.
TruBass + SRS Provides both TruBass and SRS effects.
4 Press HOME MENU to exit the menu.
• (WOW) designates a status where the FOCUS
is on and TruBass + SRS has been selected for Front
Surround.
• is a trademark of SRS Labs, Inc.
• WOW technology is incorporated under license from
SRS Labs, Inc.
• The effect of this function differs depending on
signals.
• You cannot set up the sound field for listening with
phones.
• If you set up the sound field with phones connected,
the new setting will become effective for sound from
the speakers after the phones are disconnected.
Power Control
Power Control provides convenient functions for power
saving.
Power Control for AV source
Energy Save
Power consumption is saved by decreasing picture
brightness.
1 Press HOME MENU.
2 Press / to select “Power Control”, and then
press ENTER.
3 Press / to select “Energy Save”, and then press
ENTER.
4 Press / to select “Save”, and then press
ENTER.
Energy Save
Standard
Save
Item Description
Standard Does not decrease picture brightness.
(factory default)
Save Decreases picture brightness to save
power.
5 Press HOME MENU to exit the menu.
• You can also select this function using the Home
menu when the input source is a PC.