The initial setup menu 15 – Pioneer DVR-540HX-S User Manual

Page 125

Advertising
background image

The Initial Setup menu

15

125

En

Channel Swapping

Next Screen

Proceed to the next screen to swap channel
assignments of different presets so that you can
group together presets that naturally go together.
Select two presets to swap then press

ENTER

.

Video In/Out

Input Colour
System

Next Screen

Proceed to the next screen to set the input colour
system for the external input and the built-in TV
tuner. Use the

PREV

/

NEXT

or

INPUT

SELECT

buttons to change the preset or external

input. On the default

Auto

setting the recorder can

generally correctly detect whether the input signal is
PAL, SECAM, 3.58 NTSC or PAL-60, but in some
cases you may have to set it manually if the picture is
displayed incorrectly.

• Input Colour System cannot be set when the recorder is in D.TV mode.
• See also About the input colour system on page 134 for more information on this setting.

Component Video
Out

Interlace •

Select if your monitor/TV is not compatible with pro-
gressive-scan video.

Progressive

Select if your monitor/TV is progressive-scan compat-
ible. Check the operating instructions that came with
your monitor/TV if you’re not sure.

For Component Video Out to be effective, the AV1 Out setting (see below) must be set to something other than

RGB

.

AV1 Out

Video •

Sets the

AV1(RGB)-TV

SCART output to standard

composite video (compatible with all TVs).

S-Video

Sets the

AV1(RGB)-TV

SCART output to S-video.

Recommended if you are using a long SCART cable.

RGB

Sets the

AV1(RGB)-TV

SCART output to RGB. Good

quality but check your TV for compatibility. Note that
on this setting signals from the built-in tuner and
from external inputs is not output when the recorder
is in TV mode.

If you choose a setting that is incompatible with your TV you may not be able to see any picture at all. In this case
either switch off and reconnect using the supplied video cable, or reset the recorder (see Resetting the recorder on
page 149).
The Component Video Out setting (see above) has no effect when AV1 Out is set to

RGB

.

Setting

Options

Explanation

DVR540HXS_WV_EN.book 125 ページ 2006年3月30日 木曜日 午後12時38分

Advertising