Additional information 16 – Pioneer DVR-540HX-S User Manual

Page 141

Advertising
background image

Additional information

16

141

En

The picture is distorted

• Change the Input Line System setting (page 134). (You can also
change it by pressing the

STOP

button and

INPUT SELECT

on the

front panel simultaneously with the recorder stopped.)

Screen is stretched
vertically or
horizontally

• Make sure that the

TV Screen Size

setting (page 131) is correct for

the kind of TV you have (see also page 147).
• If you have a widescreen TV, check its aspect ratio settings.
• This recorder’s input switches into wide mode automatically
according to the input signal. When the unit connected is not
compatible with VIDEO ID-1 (widescreen signalling), set the
connected component to output 4:3 aspect ratio (standard) video.

Can’t play a disc
recorded using this
recorder on another
player

• If the disc was recorded in Video mode, make sure that it’s finalized
(page 69).
•Some players will not play recordable DVD discs, even when
recorded in Video mode and finalized.
• If the disc was recorded in VR mode, the other player must be
specifically RW compatible in order to play it (page 7).
• Discs recorded with copy-once material cannot be played on non-
CPRM compatible players (page 59).
• DVD+RW discs containing only a small amount of recorded
material may not play on other players. Finalize the disc and try again.

Can’t record or does
not record successfully

• Check that there is some remaining blank space on the DVD/HDD.
• For a Video mode disc or DVD+R, check that the disc isn’t already
finalized.
• Check the limits on the number of titles and chapters on a disc:
– HDD: 999 titles
– VR mode: 99 titles, 999 chapters per disc
– Video mode disc: 99 titles per disc, 99 chapters per title
– DVD+R/+RW: 49 titles per disc, 99 chapters per title (max 254
chapters per disc)
• Check that the source you are trying to record is not copy protected.
• For a VR formatted disc, check that the disc isn’t locked (page 114).
• Check that you are recording with the same TV system (PAL, NTSC,
etc.) as the disc has already been recorded in. All recordings on a disc
must be in the same TV system. When recording to the HDD, it is also
necessary to set the Input Line System setting to match what you want
to record (page 134).
• The power may have failed during recording.

Problem

Remedy

DVR540HXS_WV_EN.book 141 ページ 2006年3月30日 木曜日 午後12時38分

Advertising