Pause live tv, Recording 07 – Pioneer DVR-540HX-S User Manual

Page 65

Advertising
background image

Recording

07

65

En

8

Press to stop recording.

• If you set the recording time in the

previous step, you can still stop the
recording anytime by pressing

STOP

REC

.

• Recording will stop automatically when

there is no more space on the HDD/
DVD, or after 12 hours of HDD recording
(whichever is sooner).

Tip

• During recording you can turn on/off the

SCART loop through function. During
recording, press the front panel

CH +

button to switch to

SCART THRU

(loop

through on), or

CH –

to switch to

SCART

NORM

(loop though off). Loop through is

automatically reset to off after recording
has finished. Note that you can’t switch
loop through on if recording from the

AV2/(INPUT 1/DECODER)

or

AV1(RGB)-TV

connectors.

Pause Live TV

The Pause Live TV feature lets you effectively
pause a TV program you’re watching. When
you’re ready to resume watching, just press
the Play button.

To use this feature the recorder must be
connected to your TV using a SCART cable,
and the

AV Link

setting

(page 133) should be

set to

This Recorder Only

.

Not all TVs support this feature. Check the
instructions that came with your TV if you’re
not sure.

Important

• Pause Live TV only works with the built-in

A.TV (analog) tuner. It does not work with
the D.TV tuner or the external inputs.

1

Start recording the current TV

channel.

Recording continues with playback paused.

• Note that it may take up to 10 seconds

for recording to start.

2

Press to start playback.

You can also use the scan buttons (

/

), pause (

PAUSE

) and stop (

STOP

)—all without affecting the recording.

3

Press to stop the recording.

Tip

• You can press

PAUSE LIVE TV

while the

recorder is in standby to switch on and
immediately start recording. After
pressing

PAUSE LIVE TV

, it will take at

least 10 seconds for the picture to
change (during this time, all controls
except the power button are inoperative).

• Please note that you can’t record from

another component (VCR, etc.) that is
connected by a SCART cable to the

AV2/

(INPUT 1/DECODER)

connector using

the Pause Live TV feature.

Note

1 Except during Chase Play.

STOP REC

HDD

PAUSE LIVE TV

PLAY

STOP REC

DVR540HXS_WV_EN.book 65 ページ 2006年3月30日 木曜日 午後12時38分

Advertising