Britax Monarch - Manual (Page 13)

13
Using the Booster Seat
Place booster seat in a vehicle seating
position equipped with a lap-shoulder
belt. Refer to page 7 to determine the
best seating position for the child.
Position the booster seat with the back
against the vehicle seat. Adjust recline, if
necessary, for proper fit. (Fig. A) See page
11 for recline adjustments.
If needed, adjust or remove the vehicle’s
head rest to allow the backrest to fall flat
against the vehicle’s seat back.
Position lap portion of the vehicle belt
under armrest and over both color-coded
belt guides and child’s upper thighs then
buckle. (Fig. B) Ensure the buckle is secure
by gently pulling on it.
Position the shoulder portion of the
vehicle belt through the shoulder belt
guide, opposite the buckle. (Fig. C)
• Shoulder belt must be
positioned so it rests on the
child’s shoulder. To adjust
headrest, refer to page 12.
Remove slack from lap, then shoulder
portion of the vehicle belt to provide
a comfortable but snug fit for the
child. (Fig. D) See page 14 for further
instruction on securing the child.
B
A
C
D
2
1
3
4
Installation
5