What to do when these messages are displayed, What to do when these messages, Are displayed – Pioneer KRF-9000FD User Manual

Page 36

Advertising
background image

5

36

Troubleshooting

What to Do When These Messages
Are Displayed

Message

Cause (Details)

No device is connected to the input terminal.

The input terminal is connected but there is no signal.

gInput the video signals.

A video signal that cannot be used in this unit has been input.

gInput video signals that can be used.

The message is displayed when the accumulated lamp time has exceeded
1900 hours.

To clear the message, press the [EXIT] button.

gGet ready a new lamp unit and replace as soon as possible.

The message is displayed when the accumulated lamp time has exceeded
2000 hours.

The message is displayed each time during projection.

To clear the message, press the [EXIT] button.

gReplace with a new lamp unit and reset the lamp time. (pP38b40)

COMPONENT

No input

HDMI-2

Out of range

EXIT

Please Replace Lamp

EXIT

Warning

Please Replace Lamp

KRF-9000FDE_EN.book Page 36 Tuesday, February 19, 2008 9:16 AM

Advertising