Pioneer KRF-9000FD - Manual (Page 40)

40
Replacing the Lamp (Continued)
5 Troubleshooting
After installing a new lamp unit, reset the lamp hours.
A
Insert the power plug to the power outlet
B
Reset lamp hours
Resetting Lamp Hours
z
The [LAMP] indicator and [STANDBY/ON] indicator blink alternately for 3
seconds. After that, the unit switches to standby mode.
LIGHT TEST
EXIT MENU
ENTER
WARNING
LAMP
STANDBY/ON
z
Reset the lamp time only when you
have replaced the lamp.
z Never reset it when the lamp is still
in use. Otherwise, the approximate
standard for gauging replacement
time may be inaccurate and lamp
blowout may occur.
CAUTION
Light on (Red)
STANDBY/ON
EXIT ENTER HIDE
Press for 2 seconds or more
z
Press in the order as shown.
z
Press each button within 2-second intervals and press the last button for 2
seconds or more.
KRF-9000FDE_EN.book Page 40 Tuesday, February 19, 2008 9:16 AM