Mounting this unit – Pioneer KRF-9000FD User Manual
Page 49
49
Getting Started
P
B
S
Othe
ENGLISH
Measures to prevent the unit from toppling or dropping should be taken for safety reasons and accident prevention
during emergencies including earthquakes.
When mounting this unit on a pedestal or ceiling, remove the 4 feet on the bottom surface and use all the 4 screw
holes (M5 screws) to mount.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Precautions for Mounting
z
Special expertise and techniques are required for
mounting this unit. Be sure to ask your dealer or a
specialist to perform mounting.
z
Depth of the screw holes (screw length) is 30 mm. Use
screws shorter than 30 mm but longer than 19 mm.
Using other screws will result in malfunctioning or
cause the unit to drop.
z
When mounting to a pedestal, ensure sufficient space
(foot height of 21.5 mm or higher) around the unit so that
the air inlets are not blocked.
z
Do not tilt this unit more than ±5 degrees from side to side
when using. This may result in uneven colours or
shortening of lamp life.
z
Regardless whether the unit is still under guarantee,
Pioneer is not liable for any product damage caused by
mounting the unit with non-Pioneer ceiling fittings or when
the environment is not suitable for ceiling-mount.
z
When using the unit hanging from a ceiling, pay attention
to the surrounding temperature. When a heater is in use,
temperature around the ceiling is higher than expected.
Mounting this Unit
Ceiling
Air inlets
4 locations
Bottom Surface
KRF-9000FDE_EN.book Page 49 Tuesday, February 19, 2008 9:16 AM