Pioneer BCS-FS111 - Manual (Page 15)

2 Connecting
Connecting 15
C
onnecting
2
Assemble the speakers
Preparing the speakers
1. Attach the non-skid pads to the base of each
speaker.
For front speakers:
Use the supplied adhesive to attach four small
pads to the base (bottom) of each speaker.
small non-skid pads
Large non-skid pads
White (+)
Orange (+)
Black (–)
Red (+)
For subwoofer:
Use the supplied adhesive to attach four large
pads to the base of subwoofer.
small non-skid pads
Large non-skid pads
White (+)
Orange (+)
Black (–)
Red (+)
2. Connect the wires to the player.
Connect the white wire with gray line into (+)
side and the other wire into (–) side. To connect
the cable to the player, press each plastic finger
pad to open the connection terminal. Insert the
wire and release the finger pad.
small non-skid pads
Large non-skid pads
White (+)
Orange (+)
Black (–)
Red (+)
y Do not connect any speakers other than
those supplied to this system.
y Do not connect the supplied speakers to
any amplifier other than the one supplied
with this system. Connection to any other
amplifier may result in malfunction or fire.
y Please connect the speaker cable of
subwoofer (purple) to orange of the player.
y These speaker terminals carry HAZARDOUS
LIVE voltage. To prevent the risk of electric
shock when connecting or disconnecting
the speaker cables, disconnect the power
cord before touching any uninsulated parts.
, >
Caution
HB516-DH4_BDEUPPK_ENG.indd 15 2011-05-12 �� 11:43:41