Pioneer BCS-FS111 - Manual (Page 22)

22
C
onnecting
2
Connecting
OPTICAL IN connection
You can enjoy the sound from your component
with a digital optical connection through the
speakers of this system.
Connect the optical output jack of your component
into the OPTICAL IN jack on the unit. And then
select the [OPTICAL] option by pressing INPUT/
TUNER and ENTER (b). Or press OPTICAL to select
directly.
You can also use the FUNCTION button on the front
panel to select the input mode.
To the digital
optical output jack
of your component
Rear of the unit
HDMI IN 1/2 connection
You can enjoy the pictures and sound from your
component through this connection.
Connect the HDMI OUT jack of your component
into the HDMI IN 1 or 2 jack on this unit. And then
select the [HDMI IN 1/2] option by pressing INPUT/
TUNER and ENTER (b).
You can also use the FUNCTION button on the front
panel to select the input mode.
To the HDMI
OUT jack of your
component
(set-top box, digital
satellite receiver,
video game
machine, etc.)
Rear of the unit
y You cannot change the video resolution in
the HDMI IN 1/2 mode. Change the video
resolution of the connected component.
y If the video output signal is abnormal when
your personal computer is connected to
HDMI IN 1/2 jack, change the resolution
of your personal computer to 576p, 720p,
1080i or 1080p.
y The video signal from the HDMI input
cannot be output from the component or
composite video outputs.
y The player sends audio from the HDMI
inputs to both the HDMI output and to the
unit’s speakers.
, ,
Note
HB516-DH4_BDEUPPK_ENG.indd 22 2011-05-12 �� 11:43:43