09 other features, Turn on/off automatically, Setting the sleep timer – Pioneer X-EM21 User Manual

Page 20: Routing audio from other devices, Through the aux in socket, Other features

Advertising
background image

Other features

09

20

En

Chapter 9:

Other features

Turn on/off automatically

You can set a time for automatic power on and off.

Note

• Make sure that you have set the clock before this setup.

1

In standby mode, press and hold SLEEP/

TIMER.

[TIMER ON] (time for auto power on) blinks.

2

Press SLEEP/TIMER.

The hour digits blink.

3

Press

 /  to set the hour.

4

Press SLEEP/TIMER again.

The minute digits blink.

5

Press

 /  to set the minute.

6

Press SLEEP/TIMER to confirm the time for

auto power on.

[TIMER ON] blinks.

• If you want to set the power-off time, press  /

  to select [TIMER OFF] (time for auto power off),

and then repeat steps 2-6.

7

Press

 /  to select [SOURCE].

8

Press SLEEP/TIMER.

9

Select the input ([DISC], [USB], [iPod] or

[FM]) by pressing INPUT on the main unit or one
of the input function buttons on the remote
control.

• For the tuner source, you still need to press  /

  to select a programmed radio station.

• [iPod] can only be selected on the X-EM21.

10 Press SLEEP/TIMER.

The clock time is displayed.

• To deactivate the timer, press SLEEP/TIMER again.
• The power cannot be turned on while the timer is being

set. Finish setting the time, then turn on the power.

Setting the sleep timer

In the working mode, press SLEEP/TIMER repeatedly to select

a preset period (15, 30, 45, 60, or 90 minutes).
When the sleep timer is activated, [SLEEP] is displayed on the

upper-right corner of the main display.

• To deactivate the sleep timer, press SLEEP/TIMER

repeatedly until [SLEEPOFF] is displayed.

Routing audio from other devices

Through the AUX IN socket

1

Connect a stereo mini-plug cable

(commercially available) to

• the AUX IN socket on the front panel of the main unit,

and

• the headphones socket on the external device (for

example, an MP3 player).

2

Press AUX on the remote control or INPUT

repeatedly on the main unit to switch the source
to [AUX IN].

3

Play the external device.

X-EM21_SYXE8_En.book Page 20 Thursday, June 7, 2012 9:43 AM

601-EM2100-010.pdf 20

2012/7/5 11:25:06

Advertising
This manual is related to the following products: