Brocade Communications Systems ServerIron ADX 12.4.00a - Manual (Page 215)

ServerIron ADX Security Guide 201
53-1002440-03
Displaying socket information
6
Displaying SSL Statistics information
The following SSL Statistics information is available from the BP console within the rconsole mode:
• SSL Statistics alert information
• Decoded status counters of SSL alerts
• SSL decoded client site status counters
• SSL statistical counters
• SSL crypto engine status counters
To access the display command that present this information, you must enter the BP console using
the rconsole command as shown in
“Using Rconsole” on page 188.
Displaying SSL Statistics alert information
Use the show ssl statistics alert command in rconsole mode to display decoded status counters of
SSL alerts as shown in the following.
Syntax: show ssl statistics alert
ServerIronADX# rconsole 1 1
ServerIronADX1/1# show ssl statistics alert
SSL alert detail counters: RX TX
**************************************************************************
close_notify: 7410 0
unexpected_message: 0 2402
bad_record_mac: 0 0
decryption_failed: 0 0
record_overflow: 0 0
decompression_failure: 0 0
handshake_failure: 0 0
no_certificate: 0 0
bad_certificate: 0 0
unsupported_certificate: 0 0
certificate_revoked: 0 0
certificate_expired: 0 0
certificate_unknown: 0 0
illegal_parameter: 0 0
unknown_ca: 0 0
access_denied: 0 0
decode_error: 0 0
decrypt_error: 0 0
export_restrictionr: 0 0
protocol_version: 0 0
insufficient_security: 0 0
internal_error: 0 0
user_cancelled: 0 0
no_renegotiation: 0 0