Brocade Communications Systems ServerIron ADX 12.4.00a - Manual (Page 78)

64 ServerIron ADX Security Guide
53-1002440-03
Configuring numbered and named ACLs
2
ServerIronADX(config)# show access-list 99 3
Standard IP access-list 99
deny 10.10.10.1
deny 192.168.1.13
permit any
Syntax: show access-list <acl-number> [<line-number>]
Enter the ACL’ number for the <acl-number> parameter.
Determine from which line you want the displayed information to begin and enter that number for
the <line-number> parameter.
Named ACL
For a named ACL, enter a command such as the following.
ServerIronADX(config)# ip show access-list standard melon 3
Standard IP access-list melon
deny host 5.6.7.8
deny 192.168.12.3
permit any
Syntax: show ip access-list <acl-name> | <acl-number> [<line-number>]
Enter the ACL name for the <acl-name> parameter or the ACL’s number for <acl-number>.
Determine from which line you want the displayed information to begin and enter that number for
the <line-number> parameter.
Displaying ACLs using keywords
You limit the displayed ACL entries to those that contain a specified keyword.
Numbered ACL
You may have the following numbered ACL.
ServerIronADX(config)# show access-list 99
Standard IP access-list 99
deny host 1.2.3.4
permit host 5.6.7.8
permit host 5.10.11.12
permit any
If you want to display ACL entries beginning with the entry that contains the keyword “5” enter the
following command.
ServerIronADX(config)# show access-list 99 | begin 5
Standard IP access-list 99
permit host 5.6.7.8
permit host 5.10.11.12
permit any
Since the second entry is the first entry that contains the keyword “5”, the display begins with line
2.
If you want to display only the ACL entries that contain the keyword “5” enter the following
command.