Connecting the speakers, Connecting your equipment 03 – Pioneer VSX-LX53 User Manual

Page 17

Advertising
background image

Connecting your equipment

03

17

En

• Place the center speaker above or below the TV so

that the sound of the center channel is localized at
the TV screen. Also, make sure the center speaker
does not cross the line formed by the leading edge of
the front left and right speakers.

• It is best to angle the speakers towards the listening

position. The angle depends on the size of the room.
Use less of an angle for bigger rooms.

• Surround and surround back speakers should be

positioned 60 cm to 90 cm higher than your ears and
tilted slightly downward. Make sure the speakers
don’t face each other. For DVD-Audio, the speakers
should be more directly behind the listener than for
home theater playback.

• Try not to place the surround speakers farther away

from the listening position than the front and center
speakers. Doing so can weaken the surround sound
effect.

Connecting the speakers

Each speaker connection on the receiver comprises a
positive (+) and negative (–) terminal. Make sure to
match these up with the terminals on the speakers
themselves.

CAUTION

• These speaker terminals carry

HAZARDOUS LIVE

voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.

• Make sure that all the bare speaker wire is twisted

together and inserted fully into the speaker terminal.
If any of the bare speaker wire touches the back panel
it may cause the power to cut off as a safety measure.

Bare wire connections

1

Twist exposed wire strands together. (fig. A)

2

Loosen terminal and insert exposed wire. (fig. B)

3

Tighten terminal. (fig. C)

Important

• Please refer to the manual that came with your

speakers for details on how to connect the other end
of the speaker cables to your speakers.

• Use an RCA cable to connect the subwoofer. It is not

possible to connect using speaker cables.

CAUTION

• Make sure that all speakers are securely installed.

This not only improves sound quality, but also
reduces the risk of damage or injury resulting from
speakers being knocked over or falling in the event of
external shocks such as earthquakes.

fig. A

fig. B

fig. C

10 mm

Advertising
This manual is related to the following products: