Pioneer VSX-LX53 - Manual (Page 45)

Basic playback 05
45
En
Bluetooth ® ADAPTER for Wireless
Enjoyment of Music
Wireless music play
When the Bluetooth ADAPTER (AS-BT100)
1
is connected
to this unit, a product equipped with Bluetooth wireless
technology (portable cell phone, digital music player,
etc.) can be used to listen to music wirelessly. Also, by
using a commercially available transmitter supporting
Bluetooth wireless technology, you can listen to music on
a device not equipped with Bluetooth wireless
technology. The AS-BT100 model supports SCMS-T
contents protection, so music can also be enjoyed on
devices equipped with SCMS-T type Bluetooth wireless
technology.
Remote control operation
The remote control supplied with this unit allows you to
play and stop media, and perform other operations.
2
Pairing the Bluetooth ADAPTER and Bluetooth
wireless technology device
“Pairing” must be done before you start playback of
Bluetooth wireless technology content using the
Bluetooth ADAPTER. Make sure to perform pairing the
first time you operate the system or any time pairing data
is cleared. The pairing step is necessary to register the
Bluetooth wireless technology device to enable Bluetooth
communications.
3
For more details, see also the
operating instructions of your Bluetooth wireless
technology device.
1 Press , then press Home Menu.
2 Select ‘System Setup’, then press ENTER.
3 Select ‘Other Setup’, then press ENTER.
4 Select ‘Pairing Bluetooth Device’, then press
ENTER.
5 Select the ‘Passcode’ setting you want.
Select the same passcode as the Bluetooth wireless
technology device you wish to connect.
• 0000/1234/8888 – Select the passcode from these
options. These are the passcodes that can be used in
most cases.
• Others – Select to use a passcode other than those
mentioned above.
6 If you selected Others in step 5, enter the passcode.
Use
/ to select a number and / to move the
cursor.
7 Follow the instructions displayed on the GUI screen
to conduct pairing with the Bluetooth wireless
technology device.
Switch on the Bluetooth wireless technology device that
you want to make pair, place it near the receiver and set
it to the pairing mode.
8 Check to see that the Bluetooth ADAPTER is
detected by the Bluetooth wireless technology device.
When the Bluetooth wireless technology device is
connected:
CONNECTED appears in the receiver display.
4
When the Bluetooth wireless technology device is not
connected:
Go back to the passcode setting in step 5. In this case,
perform the connection operation from the Bluetooth
wireless technology device.
Note
1 The Bluetooth ADAPTER (AS-BT100) is included with the VSX-LX53, sold separately for the VSX-2020.
2 • It must be necessary that the Bluetooth wireless technology enabled device supports AVRCP profiles.
• Remote control operations cannot be guaranteed for all Bluetooth wireless technology enabled devices.
This receiver
Remote control
operation
Music data Bluetooth ®
ADAPTER
Bluetooth
wireless
technology
enabled device:
cell phone Bluetooth wireless
technology
enabled device:
Digital music
player
Device not
equipped with
Bluetooth wireless
technology:
Digital music
player
+
Bluetooth audio
transmitter
(sold commercially)
3 • Pairing is required when you first use the Bluetooth wireless technology device and Bluetooth ADAPTER.
• To enable Bluetooth communication, pairing should be done with both your system and Bluetooth wireless technology device.
4 The system can display alphanumeric characters only. Other characters may not be displayed correctly.
RECEIVER