Audio adjustments, Introduction of audio adjustments 42, Using balance adjustment 42 – Pioneer DVH-P500UB User Manual

Page 42: Using the equalizer 42, Operating this unit, Introduction of audio adjustments, Using balance adjustment, Using the equalizer

Advertising
background image

Audio Adjustments

Introduction of audio adjustments

1

Press MULTI-CONTROL to display the

main menu.

2

Use MULTI-CONTROL to select AUDIO.

Turn to change the menu option. Press to se-
lect.
The audio menu is displayed.

3

Turn MULTI-CONTROL to select the

audio function.
Turn

MULTI-CONTROL to switch between the

audio functions in the following order.
FADER (balance adjustment)

—P.EQ (equalizer

recall)

—EQ-LOW (equalizer adjustment)—

EQ-LOW (equalizer fine adjustment)

LOUDNESS (loudness)

—SUB W1 (subwoofer

on/off setting)

—SUB W2 (subwoofer setting)

—HPF (high pass filter)—BASS BOOST (bass
boost)

—SLA (source level adjustment)

# You can also use A.MENU on the remote con-
trol to select an audio menu.
# You can select the SUB W2 only when sub-
woofer output is turned on in

SUB W1.

# When selecting FM as the source, you cannot
switch to

SLA.

# To return to the display of each source, press
BAND.
# If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.

Using balance adjustment

You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.

1

Use MULTI-CONTROL to select FADER.

Refer to Introduction of audio adjustments on
this page.

# If the balance setting has been previously ad-
justed,

BALANCE will be displayed.

2

Push MULTI-CONTROL up or down to

adjust front/rear speaker balance.
FADER :F15 to FADER :R15 is displayed as the
front/rear speaker balance moves from front to
rear.

# FADER :F/R0 is the proper setting when only
two speakers are used.
# When the rear output setting is SUB W, you
cannot adjust front/rear speaker balance. Refer to
Setting the rear output and subwoofer controller
on page 54.

3

Push MULTI-CONTROL left or right to

adjust left/right speaker balance.
BALANCE :L15 to BALANCE :R15 is displayed
as the left/right speaker balance moves from
left to right.

Using the equalizer

The equalizer lets you adjust the equalization
to match the car

’s interior acoustic character-

istics as desired.

Recalling equalizer curves

There are six stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.

Display

Equalizer curve

POWERFUL

Powerful

NATURAL

Natural

VOCAL

Vocal

CUSTOM

Custom

FLAT

Flat

SUPER BASS

Super bass

Operating this unit

En

42

Section

02

Advertising