Pioneer X-EM12 - Manual (Page 12)

Playing 05
12
En
Chapter 5:
Playing
Playing a disc
1 Press DISC on the remote control or INPUT
repeatedly on the main unit to switch the source
to [DISC].
2 Press  to eject the disc tray.
3 Load a disc with the printed side facing up.
4 Press  again to close the disc tray.
Playback starts automatically after a few seconds.
• If playback does not start automatically, press  to
start playback.
Playing from a USB storage device
This system can play .mp3 and .wma files that are copied onto
a supported USB storage device:
• Flash drive
• Memory card reader
• HDD: hard disk drive (This product can detect only a
portable HDD with USB power peak current no more
than 500 mA.)
Note
• Pioneer does not guarantee compatibility with all USB
storage devices.
• NTFS (New Technology File System) file system is not
supported.
1 Connect the USB storage device to the USB
socket.
2 Press USB on the remote control or INPUT
repeatedly on the main unit to switch the source
to [USB].
Playback starts automatically.
If playback does not start automatically,
1 Press
/ to select an album.
2 Press / to select a track.
3 Press  to start playback.
Controlling playback
During playback, follow the instructions below to control
playback.
Buttons Functions
 Pause or resume playback.
 Stop playback.
/ Skip to the previous or next track.
Press and hold to rewind a track or
search forward fast within a track.
/ Skip to the previous or next album when
no less than one album exists.
REPEAT Select an available play mode.
• Repeat 1 [REP ONE]: repeat the
current track
• Repeat all [REP ALL]: repeat all tracks
• Repeat album [REP ALB]: repeat the
current album (only USB function)
SHUFFLE Select an available play mode.
• Shuffle : play tracks randomly
Shuffle is unavailable for
programmed tracks.
X-EM22_SYXE8_En.book 12 ページ ２０１４年６月６日 金曜日 午後３時４９分