Pioneer X-EM12 - Manual (Page 21)

Additional information 09
21
En
English
Français
Español
When the Bluetooth wireless technology device is connected or operated (X-EM22 only)
Cautions on use
When moving this unit
When moving this unit, be sure to first check that there is no
disc loaded. Then press  STANDBY/ON, wait until
[GOOD BYE] disappears on main display to turn off, and then
unplug the power cord. Damage may occur if the unit is
transported or moved with a disc inserted, or when another
device is connected to the USB terminal, or AUDIO IN mini-
plug jack.
Place of installation
• Choose a stable place near the TV or stereo system being
used with this unit.
• Do not place this unit on top of a TV or color monitor.
Also, install it away from cassette decks and other
devices easily affected by magnetic forces.
Avoid the following locations:
• Places exposed to direct sunlight
• Humid or poorly ventilated places
• Extremely hot places
• Places exposed to vibrations
• Places in which there is much dust or cigarette smoke
• Places exposed to soot, steam, or heat (kitchens, etc.)
Do not place objects on this unit
Do not place any objects on top of this unit.
Do not obstruct the ventilation holes.
Do not use this unit on shaggy rugs, beds, sofas, etc., or
wrapped in cloth, etc. Doing so will prevent the heat from
dispersing, leading to damage.
Do not expose to heat.
Do not place this unit on top of an amplifier or other
components that generate heat. When rack mounting it, to
avoid the heat given off by the amplifier or other audio
components, place it on a shelf below the amplifier.
• Turn off the power of this unit when not using it.
• Depending on signal conditions, striped patterns may
appear on a TV screen and noise may enter the sound of
radio broadcasts when the power of this unit is on. If this
happens, turn off the power of this unit.
Problem Solution
X-EM22 only
The Bluetooth wireless technology device
cannot be connected or operated.
Sound from the Bluetooth wireless
technology device is not emitted or the
sound is interrupted.
Check that no object that emits electromagnetic waves in the 2.4 GHz band (microwave oven,
wireless LAN device or Bluetooth wireless technology apparatus) is near the unit. If such an
object is near the unit, set the unit far from it. Or, stop using the object emitting the
electromagnetic waves.
Check that the Bluetooth wireless technology device is not too far from the unit and that
obstructions are not set between the Bluetooth wireless technology device and the unit. Set
the Bluetooth wireless technology device and the unit so that the distance between them is
less than about 10 m* and no obstructions exist between them.
* The distance given is to be used as a rough guide. The actual allowable distance between devices
may vary depending on conditions in the surrounding environment.
The Bluetooth wireless technology device may not be set to the communication mode
supporting the Bluetooth wireless technology. Check the setting of the Bluetooth wireless
technology device.
X-EM22_SYXE8_En.book 21 ページ ２０１４年６月６日 金曜日 午後３時４９分