Pioneer AXM-P90RS - Manual (Page 21)

TV tuner
Basic Operations
You can use this unit to control a TV tuner,
which is sold separately.
1 2
3
1 Band indicator
2 Preset number indicator
3 Channel indicator
1 Press SOURCE to select the TV.
# Pressing TV can also select TV.
2 Press BAND to select a band.
Press BAND until the desired band (TV1 or
TV2) is displayed.
3 To perform manual tuning, move the
thumb pad left or right.
4 To perform seek tuning, hold the
thumb pad left or right for about one sec-
ond and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
# You can cancel seek tuning by moving the
thumb pad left or right.
# If you hold the thumb pad left or right, you
can skip broadcasting channels. Seek tuning
starts as soon as you release the thumb pad.
Function control
1
1 Function control screen
Shows the function names and status.
1 Click and hold the thumb pad to display
the function control screen.
2 Press and hold FUNC 1 to control the
function.
FUNC 1: Press and hold to control BSSM (best
stations sequential memory). (Storing the
strongest broadcast stations sequentially on
this page)
3 Click and hold the thumb pad to exit
the function control screen.
Storing the strongest broadcast
stations sequentially
% Press and hold FUNC 1 on the function
control screen.
BSSM begins to flash. While BSSM is flashing
the 6 strongest broadcast stations will be
stored in order from the lowest channel up.
When finished,
BSSM stops flashing.
# To cancel the storage process, press FUNC 1
again.
Note
Storing broadcast stations with BSSM may re-
place broadcast stations you have saved using
FUNC 1 to FUNC 6.
Available accessories
En
21
Section
05
A
vailable
accessories