Pioneer AXM-P90RS - Manual (Page 22)

Storing and recalling broadcast
stations
You can easily store up to 6 broadcast stations
for later recall.
! Up to 12 stations, 6 for each of the two TV
bands, can be stored in memory.
Switching to the preset tuning screen
% Press SHIFT on the function control
screen.
Preset tuning screen is displayed.
# Press RETURN to switch to the function con-
trol screen.
Storing presets
% Press and hold FUNC 1 to FUNC 6 on the
preset tuning screen.
The broadcast station is stored in memory that
corresponds to
FUNC 1 to FUNC 6.
Recalling presets
% Press FUNC 1 to FUNC 6 on the preset
tuning screen.
The broadcast station that corresponds to
FUNC 1 to FUNC 6 is tuned in.
# Moving the thumb pad up or down also recalls
the preset station.
Auxiliary (AUX) devices
Basic Operations
Up to five auxiliary devices can be connected to
this unit. Name for each auxiliary device can be
changed.
! Auxiliary devices connected to this unit can
be activated or deactivated individually. For
details, refer to Switching the auxiliary set-
ting on page 11.
! This unit can control five devices as AUX
sources. The following devices can be con-
nected to this unit.
— Devices with RCA output; This unit con-
trols them as AUX1 Main or
AUX2 AUX.
If the device you want to connect as an
AUX unit does not have an RCA output,
supplied speaker-RCA conversion cable
can be used. In this case, the connected
device is controlled as
AUX1 Main or
AUX2 AUX.
— Devices with digital output; This unit
controls it as AUX3 Digital.
— Devices with 3.5 mm mini plug; This unit
controls it as AUX4 MiniPlug.
— Devices with Pioneer IP-BUS; This unit
controls it as AUX5 IP-BUS.
Device connected with IP-BUS-RCA inter-
connector is controlled as
AUX5 IP-BUS.
% Press SOURCE to select the AUX1 Main,
AUX2 AUX, AUX3 Digital, AUX4 MiniPlug
or AUX5 IP-BUS.
# Pressing AUX/EXT can also select
AUX1 Main, AUX2 AUX, AUX3 Digital,
AUX4 MiniPlug or AUX5 IP-BUS.
Available accessories
En
22
Section
05