Pioneer AXM-P90RS - Manual (Page 39)

Troubleshooting
Common
Symptom Cause Action (See)
Power doesn
’t turn on.
The unit doesn ’t operate.
Leads and connectors are incor-
rectly connected. Confirm once more that all connections are
correct.
The fuse is blown. Rectify the reason for the fuse blowing, then
replace the fuse. Be very sure to install a fuse
with the same rating.
Noise and other factors are causing
the built-in microprocessor to oper-
ate incorrectly. Turn the unit off and then on.
Operation with the remote con-
trol isn
’t possible.
The unit does not operate cor-
rectly even when the appropriate
remote control buttons are
pressed.
Battery power is low. Load new battery. (Page 4)
No sounds are heard.
The volume level will not rise. Cables are not connected correctly. Connect the cables correctly.
There is no sound.
Volume level is low. The volume level is low. Adjust the volume level.
The attenuator is on. Turn the attenuator off.
Additional Information
En
39
Appendix
Additional
Information