Pioneer RMX-1000-M - Manual (Page 17)

17 En
English
TRANS/ROLL
 TRANS: When turned counterclockwise
This function cuts the input sound according to the multiplying factor of
the beat set at the position of the control.
LOW control
Adjusts the amount by which the low frequency sound
is cut.
MID control
Adjusts the amount by which the mid frequency sound
is cut.
HI control
Adjusts the amount by which the high frequency sound
is cut.
1/1 beat
1/4 beat
Time
1/2 beat
 ROLL: When turned clockwise
This function records the input sound starting from the point when the
[LOW], [MID] or [HI] control is turned and outputs the recorded sound
repeatedly according to the multiplying factor of the beat set at the posi-
tion of the control.
LOW control
Adjusts the cycle at which the low frequency sound is
output repeatedly.
MID control
Adjusts the cycle at which the mid frequency sound is
output repeatedly.
HI control
Adjusts the cycle at which the high frequency sound is
output repeatedly.
Effect turned on
Repeated
Original
1/1 roll
Repeated
1/2 roll
GATE/DRIVE
 GATE: When turned counterclockwise
This function outputs the portion of the input sound that has a level
higher than the threshold level, cutting the portion of the input sound
with a lower level.
LOW control Adjusts the threshold level of the low frequency sound.
MID control Adjusts the threshold level of the mid frequency sound.
HI control Adjusts the threshold level of the high frequency sound.
Threshold
Threshold
Level
Threshold
Time
 DRIVE: When turned clockwise
This function distorts the input sound.
LOW control
Adjusts the amount by which the low frequency sound
is distorted.
MID control
Adjusts the amount by which the mid frequency sound
is distorted.
HI control
Adjusts the amount by which the high frequency sound
is distorted.
Time
Cycle
Types of X-PAD FX effects
ROLL
Records the input sound starting from the point when
the [X-PAD] is touched and outputs the recorded sound
repeatedly according to the multiplying factor of the beat
set with the [X-PAD].
KICK Outputs this unit’s internal “KICK” sound source.
SNARE Outputs this unit’s internal “SNARE” sound source.
CLAP Outputs this unit’s internal “CLAP” sound source.
HI HAT Outputs this unit’s internal “HI HAT” sound source.
SAMPLER
Outputs the sampled sound recorded on an SD memory
card.
Types of RELEASE FX effects
VINYL BRAKE
Achieves the effect of the input sound’s playing speed
gradually slowing and finally stopping.
ECHO
The echo is output several times in beat with the input
sound, with the delay sound gradually attenuating.
BACK SPIN
Achieves the effect of the currently playing input sound
being played in reverse at high speed.