Pioneer VSX-AX2AS-s - Manual (Page 68)

Using other functions 10
68
En
Playing a different source when recording
Using this receiver, it’s possible to listen to a different
source than the one you’re recording.
1 During recording, press the REC SELECT CONTROL
button on the front panel until RECOUT shows in the
display. 1
2 While RECOUT shows in the display, use the
INPUT SELECTOR dial to select the source you want
to record.
The default, RECOUT SOURCE , records the source you’re
currently listening to (as in Making an audio or a video
recording above).
• Note that the setting you make here is stored in
memory, even if you switch off the receiver, so if you
want to record a different input source later, you
must do so with
REC SELECT , or by selecting
RECOUT SOURCE .
3 After RECOUT disappears from the display, select
the input source you want to listen to.
This will be heard from the main system without affecting
your recording. 2
Tip
• If you have a digital recorder connected to the
DIGITAL OUT1 ( ROOM3 ) digital output and ROOM
3 is switched on (see Using the multi-room controls
on page 58), you can also select a different input
source for this output while
ROOM 3 shows in the
display.
Reducing the level of an analog signal
The input attenuator lowers the input level of an analog
signal when it’s too strong. You can use this if you find
the that the
OVER indicator is lights often, or you can
hear distortion in the sound.
3
• Press ANALOG ATT to switch the input attenuator
on or off.
Watching video and audio sources
independently
You can listen to a sound source and select a different
video source on your TV.
• While listening to a source, press VIDEO SEL ( VIDEO
SELECT ) to select the video source you want to watch.
Press repeatedly to cycle through the possible video
sources. You can select
DVD , TV , SAT , DVR1 , DVR2 ,
VIDEO1 , VIDEO2 or OFF (no video signal).
4
Note
1 If RECOUT does not appear in the display, you may have to switch ROOM 2 off by pressing MULTI ROOM & SOURCE ON/OFF and selecting either
ROOM 3 or off (the MULTI-ROOM indicator disappears). See Using the multi-room controls on page 58 for more on this.
2 • Note that switching the ROOM 2 input source (as explained in Multi-room listening on page 57) also changes the RECOUT input source.
• If RECOUT SOURCE is selected, changing the input source likewise changes the input source used for your recording.
SPEAKERS (TUNE +)
ENTER
(TUNE –)
PHONES
AV
PARAMETER
SETUP
(ST –) (ST +)
TUNER
EDIT
BAND
CONTROL ON/OFF
VIDEO
SELECT
SIGNAL
SELECT SBch
PROCESSING STEREO
VIDEO/GAME 2 INPUT
DIGITAL IN S-VIDEO VIDEO L R AUDIO
MULTI – ROOM &
SOURCE/REC SEL
MCACC
SETUP MIC
RETURN
3 The attenuator isn’t available with digital sources, or when using the Stream Direct modes.
4 • Note that this feature will not work with video sources assigned to either of the HDMI video inputs.
• This feature is not available when watching photos or video content from a connected iPod (see page 49).
SLEEP
+10
SR+
ANALOG
ATT
DISC
VIDEO
SEL
DIMMER S.RETRIEVER
CLASS D.ACCESS
ENTER
C
SLEEP
+10
SR+
ANALOG
ATT
DISC
VIDEO
SEL
DIMMER S.RETRIEVER
CLASS D.ACCESS
ENTER
AV PARAMETER CH LEVEL
VSX_AX4ASi.book.fm 68 ページ ２００６年６月８日 木曜日 午後１２時２３分