Pioneer DEH-6200BT - Manual (Page 8)

Switching between callers on hold
1 Press M.C.
Canceling call waiting
1 Press PHONE/ /CONNECT.
Adjusting the other party ’s listening volume
1 Push M.C. up or down while talking on the
phone.
Turning private mode on and off.
1 Press BAND/ESC while talking on the phone.
Switching the information display
1 Press
/ DISP/SCRL while talking on the phone.
! Press and hold
/ DISP/SCRL to scroll.
Notes
! If private mode is selected on the cellular
phone, hands-free phoning may not be avail-
able.
! The estimated call time appears in the display
(this may differ slightly from the actual call
time).
Menu operations identical
for function settings/audio
adjustments/initial
settings/lists
Returning to the previous display
Returning to the previous list/category (the folder/ca-
tegory one level higher)
1 Press
/ DISP/SCRL.
Returning to the main menu
Returning to the top tier of list/category
1 Press and hold
/ DISP/SCRL.
Returning to the ordinary display
Canceling the initial setting menu
1 Press BAND/ESC.
Returning to the ordinary display from the list/cate-
gory
1 Press BAND/ESC.
Tuner
Basic Operations
Selecting a band
1 Press BAND/ESC until the desired band (FM-1,
FM-2, FM-3 for FM or MW/LW) is displayed.
Manual tuning (step by step)
1 Push M.C. left or right.
Preset tuning
1 Push M.C. up or down.
Seeking
1 Push and hold M.C. left or right, and then re-
lease.
You can cancel seek tuning by pushing
M.C. left
or right.
While pushing and holding
M.C. left or right, you
can skip stations. Seek tuning starts as soon as
you release
M.C.
Note
This unit
’s AF (alternative frequencies search)
function can be turned on and off. AF should be
off for normal tuning operation (refer to page 10).
Using PI Seek
If the tuner cannot find a suitable station, or
the reception status deteriorates, the unit
automatically searches for a different station
with the same programming. During the
search,
PI seek is displayed and sound is
muted.
Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, the
unit can be set to perform PI Seek during pre-
set recall.
! The default setting for Auto PI Seek is off.
Refer to Auto PI (auto PI seek) on page 19.
Storing and recalling stations
You can easily store up to six stations for each
band as presets.
En
8
Section
02 Operating this unit