Pioneer AVH-P6300BT - Manual (Page 60)

If text information such as the title name, artist
name or a comment is embedded in a Eur-
opean language or Russian, they can also be
displayed on this unit.
! The language can be changed for the fol-
lowing:
— System menu
— Video Setup menu
— On-screen display
— Multi language setting for DivX
! If the embedded language and the selected
language setting are not the same, text in-
formation may not display properly.
! Some characters may not be displayed
properly.
! To complete this operation, switch the igni-
tion key off and on after you set this set-
ting.
1 Display the system menu.
Refer to Introduction of menu operations on
page 40.
2 Touch System Language on the system
menu to select the desired language.
3 Touch the desired language.
Русский (Russian)—English (English)—
Français (French)
—Español (Spanish)
Clearing Bluetooth memory
Important
Never turn the unit off while the Bluetooth mem-
ory is being cleared.
1 Turn the unit off.
Refer to Basic operations of this unit on page
10.
2 Display the system menu.
Refer to Introduction of menu operations on
page 40.
3 Touch Bluetooth Memory Clear on the
system menu.
4 Touch Clear.
After selecting a desired item, a confirmation
display appears. Touch
OK to delete the mem-
ory.
# If you do not want to clear the memory, touch
Cancel.
Updating Bluetooth connection
software
This function is used to update this unit with
the latest software. For information on the soft-
ware and updating, refer to our website.
Important
Never turn the unit off and never disconnect the
phone while the software is being updated.
1 Turn the unit off.
Refer to Basic operations of this unit on page
10.
2 Display the system menu.
Refer to Introduction of menu operations on
page 40.
3 Touch Bluetooth Software Update.
4 Touch Start to display the data transfer
mode.
# Follow the on-screen instructions to finish up-
dating the software.
Displaying the Bluetooth
system version
If this unit fails to operate properly, you may
need to consult your dealer for repair. In such
cases, you may be asked to specify the system
version. Perform the following procedure to
check the version on this unit.
1 Turn the unit off.
Refer to Basic operations of this unit on page
10.
2 Display the system menu.
Refer to Introduction of menu operations on
page 40.
3 Touch Bluetooth Version Information to
display to the version of the Bluetooth
module of this unit.
En
60
Section
12 Menu operations