Pioneer SPH-DA01 - Manual (Page 11)

Using functions
Entering a frequency
1 Tap to switch to the frequency band
you want to enter.
2 Tap .
3 Enter a frequency of your choice and
tap [Enter].
Storing the frequencies to a
preset channel
1 Adjust to a frequency you want to reg-
ister.
2 Tap .
3 Tap the channel of the frequency you
want to register.
Storing the strongest broadcast
frequencies
This function automatically assigns frequen-
cies with good reception to the preset chan-
nels in the selected band.
You can update six channels in each band. Up
to 18 channels in the same band can be up-
dated at one time.
p Storing broadcast frequencies may replace
broadcast frequencies you have already
saved.
p The lowest frequency is registered for chan-
nels that could not be registered automati-
cally.
% Tap .
Recalling broadcast frequencies
% Tap any frequency on the preset chan-
nel keys.
Preset channel keys
Using radio text
This tuner can display radio text data trans-
mitted by RDS stations, such as station infor-
mation, the title of the currently broadcast
song and the name of the artist.
p When no radio text is received, “No Text” is
displayed.
% Tap .
RDS functions
The functions related to RDS (Radio Data Sys-
tem) are available only in areas with FM sta-
tions broadcasting RDS signals. Even if this
product is receiving an RDS station, not all the
functions related with RDS will be available.
You can make the settings for the RDS func-
tion on the optional menu.
Receiving date and time data
You can set up to receive date and time data to
automatically update the date setting of this
product. (CT function)
1 Tap to open the optional menu.
2 Tap [CT].
Each tap of [ CT] changes the setting as fol-
lows:
! OFF (default):
Turns off CT function.
Engb
11
Chapter
04
Using
the
radio
Using the radio