Pioneer CDJ-850 - Manual (Page 14)

DRB1527-B
En 14
14
Main unit display
7
4
5
6
8 9 a
3
2
1
b c
d
e
f
1 Playing address display
The track is displayed as a bar graph.
Turns off from the left side when the remaining time is displayed. The
entire graph flashes slowly when the remaining track time is under 30
seconds, then flashes quickly when the remaining track time is under
15 seconds.
2 CUE
The positions of currently set cue and loop points are displayed as
marks.
3 MEMORY
Cue and loop points recorded on USB devices are displayed as
marks.
4 INFO (page 18)
This lights when the [INFO] screen is displayed.
5 TAG LIST (page 17)
This lights when the [TAG LIST] screen is displayed.
6 BROWSE (page 16)
This lights when the [BROWSE] screen is displayed.
7 Information display section
The characters that can be displayed are letters A to Z, numbers 0 to
9 and certain symbols. “?” is displayed for other characters.
8 Track number
This displays the track number.
It is not possible to display more than 100 tracks.
9 REMAIN
This lights when the time display is set to the remaining time.
a A. CUE (page 20)
This lights when auto cue is set.
b M, S, F (time display)
“M” indicates minutes, “S” seconds, “F” frames.
There are 75 frames to a second.
c % (playing speed display)
This indicates the percentage by which the playing speed is changed.
d BPM
Displays BPM (Beats Per Minute) of the track currently being played.
e MT
This lights when the master tempo is set.
f WIDE, ±16, ±10, ±6
This indicates the range by which the playing speed can be adjusted.
Jog dial display section
1
2
3
4
5
1 Operation display
This indicates the playing position, with one revolution equal to 135
frames. It turns during playback and stops in the pause mode.
2 Cue point display
3 Audio memory status display
This flashes when the audio memory is being written. It stops flash-
ing, remaining lit, when writing is completed.
It may not be possible to perform the real time cue operation while
the audio memory is being written.
The display also flashes when there is not enough memory due to
scratch play.
4 Jog touch detection display
When the jog mode is set to VINYL, the top of the jog dial lights when
pressed.
5 VINYL
This lights when the jog mode is set to VINYL.