Pioneer X-SMC1-W - Manual (Page 22)

Using the tuner 08
22
En
Chapter 8:
Using the tuner
• This unit can not transfer FM radio from the HDMI OUT
terminal.
Connect the FM antenna
Connect the FM antenna plug onto the center pin of the FM
antenna socket.
1 For details, see Connecting the FM antenna
on page 7.
Listening to the FM radio broadcasts
The tuner can receive FM broadcasts, and can save your
favorite stations.
1 Press FUNCTION / to select FM as the
input source.
The tuned frequency will be displayed on the front panel
display (e.g., ‘
’).
2 Tune into a station.
When the tuner receives FM broadcasts, the TUNE indicator
lights.
There are two ways to do this:
Automatic tuning - To search for stations, press and
hold TUNE +/– for about a few second. This unit will start
searching for the next station, stopping when it has
found one. Repeat to search for other stations.
Manual tuning - To change the frequency one step at a
time, press TUNE +/–.
Saving stations
You can save up to 9 station presets so that you always have
easy access to your favorite stations without having to tune in
manually each time.
2
• Manually saving station presets
1 Press FUNCTION / to select FM as the
input source.
The tuned frequency will be displayed on the front panel
display.
2 Tune into a station.
3 Press and hold a number button (1 to 9) for
three seconds.
The tuned frequency is preset to the selected number button.
The previous station preset is overwritten.
• Automatically saving station presets
1 Press and hold PRESET + for three seconds.
Auto tuning starts.
• The tuned frequencies will be preset to the buttons in
numerical order.
• Auto tuning stops automatically after setting up the FM
band, or after the limit of 9 presets has been reached.
Listening to station presets
1 Press FUNCTION / to select FM as the
input source.
The tuned frequency will be displayed on the front panel
display.
2 Press the number button (1 to 9) that stores
the FM radio station.
Tip
• Press PRESET +/– repeatedly to selected the station
preset in numerical order.
Note
1 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.
2 When a new broadcast frequency is stored in a station containing a previously stored frequency, the previous frequency will be overwrit-
ten with the new one.
08_tuner_SMC1.fm 22 ページ ２０１１年６月１５日 水曜日 午後５時４９分