Additional information 13 – Pioneer X-SMC1-W User Manual

Page 34

Advertising
background image

Additional information

13

34

En

When connected to an HDMI-compatible
device

When an iPod/iPhone is connected

Folder or file names are not
displayed in alphabetical
order.

This is not a problem with this unit.

The order of the folder and file names displayed on the Disc
Navigator
depends on the order in which the folders or files were
recorded on the USB storage device.

Much time is required to
recognize the USB storage
device.

What is the USB storage devices
capacity?

Some time may be required to load the data when large capacity
USB storage devices are connected (this could take several
minutes).

Power is not supplied to the
USB storage device.

Is Err displayed on the front panel
display? No power is supplied if the
power consumption is too high.

Turn the power off then back on.

Turn the power off, then disconnect and reconnect the USB storage
device.

Press FUNCTION

/ to switch to the other mode, then switch

again to the USB mode. (When the input is switched back to USB,

’ is displayed on the front panel display.)

Problem

Check

Remedy

Problem

Check

Remedy

Picture is not displayed.

Is the resolution properly set?

Set HDMI Resolution properly for the connected device (page 26).

Restore HDMI Resolution to the default setting (720x480p)
(page 26).

Is the HDMI cable properly
connected?

Connect the cable securely (all the way in).

With some cables, 1080p video signals will not be output.

Sound is not produced or is
distorted.

Is HDMI Out properly set?

Set HDMI Out to LPCM (2CH) or Auto (page 26).

Multichannel audio signals
are not output.

Is HDMI Out properly set?

Set HDMI Out to Auto (page 26).

Colors are not properly
displayed on TV screen.

Is HDMI Color properly set?

Change the HDMI Color setting (page 26).

Problem

Remedy

Can’t operate the iPod/
iPhone by the remote control.

Make sure the iPod/iPhone is connected correctly (refer to
Connecting your iPod/iPhone on page 14).

Can’t operate the iPod/
iPhone.

Make sure the iPod/iPhone is connected correctly (refer to
Connecting your iPod/iPhone on page 14).
If the iPod/iPhone is experiencing a hangup, try resetting the iPod/
iPhone, and reconnect it to the unit.

X-SMC1_SYXZT8_En.book 34 ページ 2011年6月15日 水曜日 午後4時44分

Advertising
This manual is related to the following products: