09 using the unit with other televisions, Using the unit with other televisions, Using the unit with other televisions 09 – Pioneer PDA-V100HD User Manual
Page 17: Chapter 9
Using the unit with other televisions
09
17
En
English
Chapter 9
Using the unit with other televisions
Follow the procedures listed below when using this unit
as an AV selector.
Be sure that the power switches of both television set
and this unit are set to off before making connections
and settings.
1
Set the HDMI CONTROL switch to OFF.
2
Connect this unit to other components.
• Be sure power is turned off before making
connections.
• Regarding connections, see section
Using with
other components on page 21.
3
Turn power on.
• Turn power on only after connecting all other
components.
4
Confirm that the HDMI CONTROL indicators are
not lighted.
5
Select the input.
• Confirm that the
INPUT button and the remote
control unit’s
INPUT (1 to 6) buttons can be used to
change the source input.
When turning power off:
Press the
STANDBY/ON button or the remote control
unit’s button to turn power off.
HDMI
CONTROL
ON/OFF