Pioneer PDA-V100HD - Manual (Page 20)

Advanced functions 10
20
En
Setting the video signal format
When converting analog input signals to HDMI, set the
colour format.
• Press the remote control unit’s VIDEO button.
The following items can be set:
Note
• Under normal conditions, leave this set to Auto.
Setting the audio signal when using HDMI
input
When using an HDMI input, set the audio signal
format.
This setting is supported when the currently selected
input is INPUT 1 (HDMI), INPUT 3 (HDMI), or INPUT 4
(HDMI).
• Press the remote control unit’s AUDIO button.
The following items can be set:
Note
• Under normal conditions, leave this set to Auto.
• This setting cannot be made for INPUT 6, since
analog audio connectors are not provided.
Item Description
Auto
(default) Automatically sets the signal format in
response to the input signal.
Colour-1 Digital Component Video signals (4:2:2)
locked
Colour-2 Digital Component Video signals (4:4:4)
locked
Colour-3 Digital RGB signals (16 to 235) locked
Colour-4 Digital RGB signals (0 to 255) locked
INPUT
SETTING
RESOLUTION
COLOUR
SYSTEM
SIGNAL
SELECT
VIDEO
AUDIO
HDMI
1 2 3
4 5 6
Item Description
Auto
(default) Audio signal format is set automatically
in response to the type of input signal.
Digital Plays only HDMI digital audio.
Analogue When both HDMI and analog connec-
tors are connected, analog signals only
are played.
INPUT
SETTING
RESOLUTION
COLOUR
SYSTEM
SIGNAL
SELECT
VIDEO
AUDIO
HDMI
1 2 3
4 5 6