Pioneer DEH-6400BT - Manual (Page 24)

2 Turn M.C. to change the menu option
and press to select ILLUMI.
3 Turn M.C. to display Key and press to
select.
4 Turn M.C. to select the illumination
color.
You can select one option from the following
list.
! 27 preset colors (WHITE to ROSE)
! SCAN (cycle through all colors)
! 3 sets of colors (WARM, AMBIENT, CALM)
! CUSTOM (customized illumination color)
Notes
! When SCAN is selected, the system automati-
cally cycles through the 27 preset colors.
! When WARM is selected, the system automa-
tically cycles through the warm colors.
! When AMBIENT is selected, the system auto-
matically cycles through the ambient colors.
! When CALM is selected, the system automati-
cally cycles through the calm colors.
! When CUSTOM is selected, the customized
color saved is selected.
Selecting the display color from the
illumination color list
You can select the desired colors for the dis-
play of this unit.
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select ILLUMI.
3 Turn M.C. to switch to Display and
press to select.
4 Turn M.C. to select the illumination
color.
You can select one option from the following
list.
! 27 preset colors (WHITE to ROSE)
! SCAN (cycle through all colors)
! 3 sets of colors (WARM, AMBIENT, CALM)
! CUSTOM (customized illumination color)
Note
For details about colors on the list, refer to Select-
ing the key color from the illumination color list on
the previous page.
Selecting key and display color from
the illumination color list
You can select the desired colors for the keys
and display of this unit.
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select ILLUMI.
3 Turn M.C. to display Key & Display and
press to select.
4 Turn M.C. to select the illumination
color.
You can select one option from the following
list.
! 27 preset colors (WHITE to ROSE)
! SCAN (cycle through all colors)
! 3 sets of colors (WARM, AMBIENT, CALM)
Notes
! You cannot select CUSTOM in this function.
! Once you select a color in this function, colors
on the keys and display of this unit automati-
cally switch to the color you selected.
! For details about colors on the list, refer to Se-
lecting the key color from the illumination color
list on the previous page.
Customizing the illumination color
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select ILLUMI.
3 Turn M.C. to display Key or Display.
Press to select.
4 Press M.C. and hold until the customiz-
ing illumination color setting appears in
the display.
En
24
Section
02 Operating this unit