Pioneer DEH-6400BT - Manual (Page 28)

Message Cause Action
CHECK USB The USB connec-
tor or USB cable
has short-
circuited. Check that the
USB connector or
USB cable is not
caught in some-
thing or damaged.
The connected
USB storage de-
vice consumes
more than
500 mA (maxi-
mum allowable
current). Disconnect the
USB storage de-
vice and do not
use it. Turn the
ignition switch to
OFF, then to ACC
or ON and then
connect only com-
pliant USB storage
devices.
The iPod oper-
ates correctly but
does not charge. Make sure the con-
nection cable for
the iPod has not
shorted out (e.g.,
not caught in
metal objects).
After checking,
turn the ignition
switch OFF and
back ON, or dis-
connect the iPod
and reconnect.
ERROR-19 Communication
failed.
! Perform one of
the following op-
erations.
–Turn the ignition
switch OFF and
back ON.
–Disconnect or
eject the external
storage device.
–Change to a dif-
ferent source.
Then, return to the
USB or SD source.
! Disconnect the
cable from the
iPod. Once the
iPod
’s main menu
is displayed, recon-
nect the iPod and
reset it.
iPod failure. Disconnect the
cable from the
iPod. Once the
iPod
’s main menu
is displayed, recon-
nect the iPod and
reset it.
Message Cause Action
ERROR-23 USB storage de-
vice was not for-
matted with
FAT12, FAT16 or
FAT32. USB storage de-
vice should be for-
matted with FAT12,
FAT16 or FAT32.
ERROR-16 The iPod firm-
ware version is
old. Update the iPod
version.
iPod failure. Disconnect the
cable from the
iPod. Once the
iPod
’s main menu
is displayed, recon-
nect the iPod and
reset it.
STOP There are no
songs in the cur-
rent list. Select a list that
contains songs.
Not found No related
songs. Transfer songs to
the iPod.
Bluetooth device
Message Cause Action
ERROR-10 The power failed
for the Bluetooth
module of this
unit. Turn the ignition
switch OFF and
then to ACC or ON.
If the error mes-
sage is still dis-
played after
performing the
above action,
please contact
your dealer or an
authorized Pioneer
Service Station.
En
28
Appendix
Additional information