Pioneer AVIC-X1BT - Manual (Page 28)

27
Installation
Installing the Bluetooth adapter
Adhere the hard Velcro tape (provided) to the bottom of the Bluetooth adapter and adhere
the soft Velcro tape (provided) to the installation location.
When installing the microphone on the sun visor
1. Install the microphone on the microphone clip.
2. Install the microphone clip on the sun visor.
With the sun visor up, install the microphone clip. (Lowering the sun visor reduces the
recognition rate for voice operations.)
Microphone clip
Clamps
Use clamps to secure the
lead where necessary inside
the vehicle.
Microphone
Microphone clip
to Bluetooth adapter
Notes:
• Direct installation on the carpet is possible if the hard Velcro tape will adhere to the
carpet. Do not use the soft Velcro tape in this case.
• Thoroughly wipe off the surface before affixing the velcro tape.
Bluetooth adapter
Velcro tape (hard)
Velcro tape (soft)
Vehicle mat or chassis