Pioneer AVIC-F10BT - Manual (Page 129)

Options on the
“AV System
Settings
” menu
Displaying the
“AV System
Settings
” menu
1 Press the HOME button to display the
“Top Menu”.
2 Touch [Settings].
The
“Settings Menu” screen appears.
3 Touch [AV Settings].
The
“AV System Settings” menu appears.
p You can only adjust [Wide Mode] when se-
lecting an AV source with video.
p You can only adjust [Rear SP] when the AV
source is
“Off”.
Setting video input 1 (AV1)
You can switch this setting according to the
connected component.
p This setting applies to mini-jack input.
% Touch [AV1 Input] on the “AV System
Settings
” menu.
= For details, refer to Displaying the “AV Sys-
tem Settings
” menu on this page.
Each touch of [ AV1 Input] changes the set-
ting as follows:
! iPod — iPod connected with the USB Inter-
face cable for iPod (CD-IU50V)
! Video — External video component
! Off — No video component is connected
p Use AV1 Input when connecting CD-RM10
(sold separately) through the external video
component.
Setting video input 2 (AV2)
You can switch this setting according to the
connected component.
p This setting applies to RCA inputs
(AUDIO INPUT and VIDEO INPUT) on the
back of the system.
% Touch [AV2 Input] on the “AV System
Settings
” menu.
= For details, refer to Displaying the “AV Sys-
tem Settings
” menu on this page.
Each touch of [ AV2 Input] changes the set-
ting as follows:
! Off — No video component is connected
! EXT — Pioneer external unit connected
with the RCA video cable
! Video — External video component
Switching the auto aerial setting
If the blue lead of the navigation system is
connected to the aerial control terminal of the
vehicle, select either of the following settings.
! Power — The aerial extends or turns on
when the ignition switch is turned on. The
aerial is stored or turned off when the igni-
tion switch is turned off.
! Radio — The aerial extends or turns on
only when the audio source is FM or AM.
The aerial is stored or turned off when the
AV source is switched to another source.
% Touch [ANT CTRL] on the “AV System
Settings
” menu.
= For details, refer to Displaying the “AV Sys-
tem Settings
” menu on this page.
Customising preferences
Engb
129
Chapter
29
Customising
pr
eferences