Pioneer AVIC-F10BT - Manual (Page 57)

Deleting a registered device
When you have already registered 5 Bluetooth
devices and you want to add another one, you
must first delete one of the registered devices.
p If a registered phone is deleted, all the
phone book entries and call history lists
that correspond to the phone will be also
cleared.
1 Display the “Bluetooth Settings”
screen.
2 Touch [Registration].
The following message appears.
3 Touch [OK].
The
“Delete From Connection List” screen
appears.
4 Touch the Bluetooth device name that
you want to delete.
The registration is cancelled.
Connecting a registered
Bluetooth device
The navigation system automatically connects
the Bluetooth device selected as the target of
connection. However, connect the Bluetooth
device manually in the following cases:
! Two or more Bluetooth devices are regis-
tered, and you want to manually select the
device to be used.
! You want to reconnect a disconnected
Bluetooth device.
! Connection cannot be established automa-
tically for some reason.
If you start connection manually, carry out the
following procedure. You can also connect the
Bluetooth device by having the navigation sys-
tem detect it automatically.
1 Activate the Bluetooth wireless tech-
nology on your devices.
For some Bluetooth devices, no specific action
is necessary to activate Bluetooth wireless
technology. For details, refer to the instruction
manual of your devices.
2 Display the
“Bluetooth Settings”
screen.
3 Touch [Connection].
The
“Connection List” screen appears.
4 Touch the name of the device that you
want to connect.
The
“Select Profile” screen appears.
Registering and connecting the Bluetooth device
Engb
57
Chapter
11
Registering
and
connecting
the
Bluetooth
device