Hale MiniCAFS 2.1A (MC50 with FoamLogix System) - Manual (Page 5)

5
MiniCAFS 2.1A Operating Manual
GP/211/05 Issue 2. April 2005
©Hale Products Europe. Our policy is one of continuous development. We therefore
reserve the right to amend specifications without notice or obligation.
MANUAL HANDLING
If the unit is to be removed from the appliance the design incorporates suitable lifting points.
The secondary starting method (hand-start) provided MUST BE USED WITH CARE.
Follow the operating instructions provided.
ENVIRONMENTAL PROTECTION
It is illegal to pour engine oil and other contaminants onto the ground, down sewers or drains, or into water
courses.
Dispose of these through authorised waste disposal contractors to licensed waste disposal sites, or to the
waste reclamation trade.
If in doubt, contact the Local Authority for advice on disposal facilities.
F.W. Mason
Managing Director
RECOMMENDED LUBRICANTS AND FUEL
ENGINE FUEL & LUBRICATING OIL
To API
specification
SF/CD
PETROL
Lead free, minimum 85 octane. (Leaded may be used if
lead free is unavailable)
-30ºC -20ºC -15ºC -10ºC 0ºC +30ºC +40ºC
-22ºF -4ºF +5ºF +14ºF +32ºF +86ºF +104ºF
SAE 20W/40 or 20W/50
SAE 15W/40 or 15W/50
SAE 10W/40 or 10W/50
SAE 10W/30
SAE 5W/30
COMPRESSOR LUBRICATING OIL
Preferred:
Tamrotor F2105 Screw Compressor Oil or Screw compressor oil meeting
ISO Viscosity grade 32 to 46.
Alternatively:
SAE 10W/40 automotive multigrade oil.