Hale MiniCAFS 2.1A (MC50 with FoamLogix System) - Manual (Page 8)

8
MiniCAFS 2.1A Operating Manual
GP/211/05 Issue 2. April 2005
©Hale Products Europe. Our policy is one of continuous development. We therefore
reserve the right to amend specifications without notice or obligation.
INSTRUMENTS COMMENTS
1. WET or DRY foam selector
Press top to make foam wetter
Press bottom to make foam dryer
2. FoamLogix display and control
See page 16 for details
3. CAFS or Foam selector
Press top for CAFS, press bottom for foam
only
4. Hours run counter
Records total number of hours engine has
been running
5. Air dump valve
Rapid relief of compressor
pressure to aid cold starting
6. Air pressure gauge
Indicates air injection pressure
7. Wet or Dry foam indicator
Indicates wet or dry composition of foam
ENGINE CONTROLS
8. High compressor oil temperature Red light
9.
Engine choke control Pull out fully when starting engine from cold
Gradually return the choke when engine is
running smoothly
10. Starter switch
Press in to start engine
11. Ignition switch
Press top to switch on ignition,
press bottom to switch off
12. Low engine oil pressure
Red light
13. Fuel shut-off
Turn Anti-clockwise to open
14.
Fuse 10 amp fuse
15.
Back-up Starting Recoil starter device
16. Charging socket
For battery charging only. A fuse (item 14) is
included to prevent its use for jump starting
17. Water supply filter
Remove filter for cleaning