Brother MFC-3200C - Manual (Page 23)

21
Make sure that you have completed the instructions in steps 1 to 20 on
pages 17 to 20.
Make sure that USB cable is connected between the MFC and your PC and
both powered ON.
K
Click “Start” and select “Printers and
Faxes”.
L
Click on “Add a printer” and the Add Printer
Wizard will start.
M
When the above screen appears, click
Next .
N
Un-check the “ Automatically detect and
install the Plug and Play printer ” selection
and then click Next .
O
Select “ USB00x (Virtual printer port for
USB) ” from the pull down window for the
Printer Port Selection and then click Next .
P
Click on Have Disk .
Q
Browse the CD-ROM for the “ WXP ” folder.
Highlight the WXP folder and click Open .
Highlight the “ Addprt ” folder and click
Open .
Installation of Brother Native Drivers For
Windows
®
XP
To be continued
Setting Up
the MFC
Windows
®
XP
Installing the Driver & Software