Brother MFC-3200C - Manual (Page 4)

2
Setting Up the MFC
Do NOT connect the USB cable.
Connecting the USB cable is done
when installing the driver.
1
Open the control panel cover by pulling it
toward you (
1 ), and then lift the top cover
toward the back ( 2 ).
2
Pull the protective yellow bar out of the
machine.
3
Close the top cover, and then close the
control panel cover.
1
Connect the curled handset cord to the
MFC and the other end to the handset.
1
Removing the Protective
Yellow Bar
Do not throw away the protective yellow bar.
You will need it in the future to transport the
machine.
Top Cover
Control
Panel Cover
Protective Yellow Bar
2 Install Handset
Step 1