Keycard, Condensed instructions – Blaupunkt BOSCH GRUPPE RMD 169 User Manual

Page 10

Advertising
background image

45

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

The ignition is off and LED ON is se-
lected in the DSC menu (default facto-
ry setting).
Further information: “Programming
with DSC, LED ON/OFF”.

@

KeyCard anti-theft protection
system
The KeyCard must be inserted before
the unit can be operated.

KeyCard

Inserting the KeyCard
To disengage the control panel, press
key

1

. The control panel folds down.

Insert the KeyCard with the contact
surface facing downwards
(see dia-
gram). Engage the control panel.

2

1

3

;

CDC
Switch to CD changer mode (only if a
CD changer is fitted).
If a CD changer is not fitted, AUX is
selected. Condition: AUX ON must be
selected in the DSC menu.

<

MD
Switch to MiniDisc mode.

=

TU (TUNER)
Switch to radio mode.
For switching to the FMI, FM II, TS
(Travelstore), MW and LW memory
levels/frequency bands.

>

Slot for MiniDisc
When the MiniDisc is inserted in the
direction indicated by the arrow with
the label facing upwards, it is automati-
cally transported into the operating po-
sition. MiniDisc play mode is selected
automatically.

?

Visual anti-theft protection
The following conditions must be met if
the LED is to flash as a visible anti-
theft protection measure:
The unit is switched off;
The control panel is open;
The KeyCard is removed;

Condensed instructions

Remove the KeyCard following the
procedure in reverse.
Important: read the information under
“KeyCard anti-theft protection system”.

A

Eject
Hold the key for MiniDisc ejection
down for approx. 2 seconds: the
MiniDisc is ejected.

For safety reasons, the control
panel must always be engaged
whilst the vehicle is moving.
When leaving the vehicle, open the
control panel and remove the Key-
Card in order to prevent theft.

Advertising